Attaching Roadie Coach to a roundback guitar or thin instruments like ukulele or electric guitars

Roadie Coach comes with a ball-head pad specifically designed to support round-back instruments such as Ovation guitars. This pad is also useful in case your instrument is thin (electric guitar or ukulele) and the flat pad on a small clamp are not enough to hold Coach in place. 

To install the ball-head pad onto the clamp you would like to use, follow these steps or watch the tutorial video below:

• Select the most appropriate clamp size for your instrument based on its width
• If a flat pad is already attached to that clamp, use a flathead screwdriver to remove it 
• Attach the ball-head pad to the inside of the clamp and use the plastic cap to screw it in place 
• Peel off the protective film layer from the ball-head pad to uncover its adhesive surface 
• Ensure the latch on the Roadie Coach is in the unlocked position and insert the clamp to the desired length 
• Position Coach over your instrument, leaving a 1mm gap for easy closure of the latch
• Secure the clamp by closing the latch